CAN-SLIP-ANGLE

Optical ground slip angle sensor.

The FooBarEngineering CAN-SLIP-ANGLE is based on the proven WSL range of loggers and designed to interface to the CAN bus.

The unit is housed in a lightweight enclosure with integrated automotive connector.

The CAN-SLIP-ANGLE measures ground position using a downward facing camera to watch the floor. It measures X-Y position by tracking features in the image.
The sensor produces an angle that the camera is moving relative to the ground whilst also producing a speed measurements in the X and Y direction.

The CAN can be defined to include any of the available data via the usb interface, but as standard its compatible with the MoTeC, Cosworth range of dashes and loggers.

Specifications

Electrical Data

Supply Voltage 10Vdc to 18Vdc
Supply Protection Reverse and over voltage
Supply Current 1000mA @ 12V
Temperature Range Operating -30°C to +60°C
Temperature Range Storage -20°C to +70°C

I/O Information

1x CAN   1Mbit, 512k, 256k, 128k software selectable, with 120 ohm selectable termination
1x GPS SMA For connection to active GPS antenna

1x USB (Debug use only) RS232 terminal for setup and in use testing/ offloading of data.

Downloads

WordPress Appliance - Powered by TurnKey Linux